Table of Contents
Advertisement
Grounding
Ensure your Fortinet product is connected and properly grounded to a lightning and surge protector.
WAN or LAN connections that enter the premises from outside the building should be connected
to an Ethernet CAT5 (10/100 Mb/s) surge protector.
Shielded Twisted Pair (STP) Ethernet cables should be used whenever possible rather than
Unshielded Twisted Pair (UTP).
Do not connect or disconnect cables during lightning activity to avoid damage to your Fortinet
product or personal injury.
Electrostatic discharge (ESD) can damage Fortinet equipment. Only perform the procedures
described in this document from an ESD workstation. If no such station is available, you can
provide some ESD protection by wearing an anti-static wrist strap and attaching it to an available
ESD connector or other bare metal object.
Note: For DC installations, a readily accessible disconnect device shall be incorporated in the
building installation wiring.
Caution: For devices that contain a battery there is a risk of explosion if battery is replaced by an
incorrect type. Recycle used batteries according to your local regulations.
警告
本電池如果更換不正確會有爆炸的危險
請依製造商說明書處理用過之電池
Advertisement
Table of Contents
