Related Manuals for Redline 2200HD
Summary of Contents for Redline 2200HD
- Page 1 2,200 LBS 2200HD ELECTRIC ATV/MOTORCYCLE LIFT Instruction Manual Please read this instruction manual carefully before use.
- Page 2 Assembly and Operating Instructions for 2200HD IMPO2T Assembly 1. Remove the lift and all the parts from the crate. 2. Remove the power unit from the smaller plywood crate. 3. Attach the hydraulic hose from the lift to the power unit.
- Page 3 Side Extension Assembly 1. There are two holes in the main body of the lift on each side. 2. Place one side extension support tube through each one of the holes in the lift. 3. There are two corresponding holes in each of the side extensions. Carefully slide the side extension onto the two tubes protruding from the main body.
- Page 4 Front Wheel Vise Assembly 1. Attach the handle assembly to the moving side of vise using four bolts and washers. The moving side of the vise is drilled and tapped to receive the four bolts. 2. The moving side of the vise is attached to the left side of the main body of the lift using 4 predrilled holes and hardware.
- Page 5 Approach Ramps The side extension approach ramps hook into holes in the ends of the side extensions. The center ramp will attach to the frame base of the lift using two pre-installed bolts.
-
Page 6: Locking Mechanism
Locking Mechanism 1. The lock release mechanism is located on the left side of the lift. 2. There are two locations for the lock release lever. The upper slot is the unlocked position and the lower location is the locked position. 3. - Page 7 Optional wheel and dolly kit 1. In the event you purchased the wheel and dolly kit with your lift, you will secure the rigid mount wheels to the end of the lift with the hardware and brackets as shown. 2. Once the rigid wheels are bolted into place, spinning the bolt head on the upper side of the bracket will raise or lower the lifts’...
-
Page 8: Safety Instructions And Warnings
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFETY INSTRUCTIONS AND WARNINGS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE TO PROPERTY AND/OR PERSONAL INJURY. PLEASE KEEP THIS INSTRUCTION MANUAL SAFE FOR FUTURE USE. - Page 9 DESCRIPTIO Q'TY DESCRIPTIO Q'TY SIDE CONNECT EXTENSION PLATE FIXED FORM HINGE BAFFLE PLATE FOR PLATE SUPPORT VISE WASHER BOLT BOLT WASHER SAFTY BASE WHEEL HOOK BASE RAM ASSY END CAP CLIP STATIONAR Y RING CONNECT TUBE...
- Page 10 NON-SLIP PLATE SCREW BASE FRAME ASSY SEAL RING WASHER CONNECTO R FOR RAM BOLT OIL HOSE SET BLOCK CONNECTO R FOR PUMP SCREW PLATE ASSY COVER SCREW COMPONEN LEADING PLATE CONNECTO R ASSY LEADING HOSE PLATE CONNECTO R ASSY WHEEL HOSE ASSY SUPPORTS FRAME FOR...
- Page 11 Additional photos for reference...