Advertisement
Front Wheel Vise Assembly
1. Attach the handle assembly to the moving side of vise using four bolts and washers. The
moving side of the vise is drilled and tapped to receive the four bolts.
2. The moving side of the vise is attached to the left side of the main body of the lift using 4
predrilled holes and hardware.
3. The fixed side of the vise mounts right of center of the lift using the 6 predrilled holes
and hardware.
4. The vise operates by rotating the handle to adjust the width of the vise to squeeze the
motorcycle tire.
5. It is MANDATORY that tie downs are used to secure the motorcycle when on the lift.
6. Install 2 eye bolts, one on each side.
Advertisement
