Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Intelbras CA-70A12
Summary of Contents for Intelbras CA-70A12
- Page 1 Intelbras CA-70A12 Power Supply User Manual...
- Page 2 Power Supply User Manual Intelbras CA-70A12 Power Supply User Manual About the power supply CA-70A12 is a DC-output power supply that supports both AC input and DC input. It provides a maximum output of 70 W. Power receptacle Captive screw...
- Page 3 Intelbras CA-70A12 Power Supply User Manual Protection function Protection state Support for auto-recovery Output overvoltage The power supply is locked and protection stops supplying power. Automatically restores power supplying after The power supply stops supplying Short-circuit protection the short circuit condition is cleared.
- Page 4 • To avoid damages, do not open the power supply. When an internal circuit or component of the power supply fails, contact Intelbras Support. • Before installing or removing the power supply, make sure no power cord is connected to it.
- Page 5 Intelbras CA-70A12 Power Supply User Manual Installation tools • Prepare the following tools yourself for installing and removing the power supply: flat-head screwdriver, Philips screwdriver, and ESD wrist strap. Installing and removing the power supply Power supply installation and removal process •...
- Page 6 Intelbras CA-70A12 Power Supply User Manual ② Unpack the power supply and verify that the power supply model is correct. ③ Correctly orient the power supply. Grasping the power supply handle with one hand and supporting the power supply bottom with the other, insert the power supply slowly into the slot along the guide rails. See callout 1 in the following figure.
- Page 7 Intelbras CA-70A12 Power Supply User Manual Connecting the power cord • Make sure the power cord has a separate circuit breaker. • Turn off the circuit breaker before connecting the power cord. • The power cord in the following figure is for illustration only. The power cord for your country or region might differ from this one.
- Page 8 Intelbras CA-70A12 Power Supply User Manual ③ Use a Phillips screwdriver to loosen the captive screws on the power supply until the captive screws are disengaged from the device. See callout 1 in the following figure. ④ Grasping the handle of the power supply with one hand, pull it part way out. Then supporting the power supply bottom with the other hand, pull the power supply slowly out of the slot along the guide rails.
Need help?
Do you have a question about the CA-70A12 and is the answer not in the manual?
Questions and answers