Xantech XSSD250W Installation Instructions

250watt, speaker selector, decora a/b source or speaker selection

INSTALLATION INSTRUCTIONS

The XSSD250W provides an easy-to-use, easy-to-install, A or B selector switch. Premium

components are used to provide high-quality speaker or amplifier selection. The XSSD250W requires

no external power source. The XSSD250W cannot be used with high power bridged amplifiers.

Source input selectable, A or B switches

Dimensions: 1.65" W x 4.0" H x 1.5" D

Screw terminal connectors used with 16 to 22 AWG wiring.

Rocker style switch

INSTRUCTIONS – ONE SPEAKER PAIR, TWO AMPLIFIERS

1) Remove ¼" of insulation from the ends of the wires.

2) Attach the speaker pair to screw terminal "Output". Note the polarity.

3) Attach one amplifier to screw terminal "Input A". Note the polarity. This is selector "A".

4) Attach the second amplifier to screw terminal "Input B". Note the polarity. This is selector "B".

08905088B

XSSD250W

250Watt, Speaker Selector, Decora

A/B Source or Speaker Selection

The figure on the left shows the

XSSD250W in an application with

two sources.

- 1 -

Table of Contents

Do you have a question about the XSSD250W and is the answer not in the manual?

Page 1: Installation Instructions
The XSSD250W provides an easy-to-use, easy-to-install, A or B selector switch. Premium components are used to provide high-quality speaker or amplifier selection. The XSSD250W requires no external power source. The XSSD250W cannot be used with high power bridged amplifiers. SPECIFICATIONS Source input selectable, A or B switches Dimensions: 1.65”...
Page 2 The figure on the left shows the XSSD250W in an application with two sources. A Xantech XVC volume control is also used to create an enhanced system. 08905088B - 2 -...
Page 3 The figure on the left shows the XSSD250W, rear view. 08905088B - 3 -...
Page 4 Covered product must be sent to Xantech together with proof of purchase, RA number, prepaid and insured to Xantech. Freight collect shipments will be refused. Risk of loss or damage in transit is borne by the sender.