Sofirn BLF LT1 Manual

Please do these before using!
Unscrew the body and remove the insulation paper!
If you have any questions, please contact us
Website: www.sofirnlight.com; www.sofirn.cn;
https://sofirn.aliexpress.com;
Email: us@sofirnlight.com(amazon);
wholesale@sofirn.cn
The product uses copyrighted code released under the GNU Public License v3 (GPLv3).
To know about the exact source code used in the product, please go to
https://tiny.cc/TKAnduril

Specifications

Emitters: 8 x Samsung LH351D(4 x 5000K 90CRI + 4 x 2700K 90CRI)
Luminous Flux: ca. 700 lm
Firmware: The LT1 uses open source software called Andúril, distributed under the terms of the
GPL v3. The source code is available from http://tiny.cc/TKAnduril
User interfaces:
By default the LT1 is set to use the SMOOTH RAMPING mode. STEPPED RAMPING mode is

available if you prefer discrete brightness steps.
MUGGLE mode simplifies the LT1's UI & features to just on/off and smooth ramping. MUGGLE

mode also reduces the maximum output level produced by the LT1 to reduce self heating.
Electronic LOCKOUT mode keeps the LT1 from being turned on accidentally. LOCKOUT mode also

provides a momentary low light when the button is pushed.
Other functions:
Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher, candlelight, & lightning

BLF LT1 Manual
https://sofirn.en.alibaba.com
eu@sofirnlight.com(amazon),