How To Use - Panasonic ES-LV5U Operating Instructions Manual

How to use

Shaving beard
1
Press and shave�
• The "shaving sensor", which
automatically adjusts the power
depending on the beard thickness,
will operate.
It will shave with high power on areas
where the beard is heavy, and reduce
the power on areas where the beard
is thin, to reduce burden on the skin.
Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin
and shave by slowly gliding the
shaver over the face against the
grain of the beard.
• The beard under the chin and
around the throat can be shaved
better by stretching the skin so
the beard will stand.
• To prevent damaging the system
outer foil, do not shave with only
a part of the system outer foil.
12
2
Press when finished.
While using
Approximate amount of battery charge
is displayed as LOW – HIGH.
• It will turn off approximately 5 seconds after
operating the switch.
• The shaving sensor lamp ( ) blinks.
When the battery capacity is low
"LOW" blinks when operating the
shaver.
• The appliance beeps twice after switched off.
• You can shave 2 to 3 times after "LOW" appears.
(This will differ depending on usage.)
Notes
• The appliance may not operate in an ambient
temperature lower than approximately 5 °C.
• The shaving sensor may not respond depending on
the type and quantity of the shaving gel. This is not
abnormal.
• Depending on the beard thickness or the amount of
beard trimmings in the shaver head, the shaving
sensor may not react and the driving sound may not
change. This is not abnormal.