How To Affix The Ferrite Core; Affix The Ferrite Core For Power Cord - LG SPJ2BM-W Owner's Manual

,
Note
y It takes a few seconds (and may take longer)
for the main unit and the subwoofer to
communicate with each other and make
sounds.
y The closer the main unit and the subwoofer,
the better sound quality. It is recommended
to install the main unit and the subwoofer as
close as possible and avoid the cases below.
- There is an obstacle between the main
unit and the wireless subwoofer.
- There is a device using same frequency
with this wireless connection such as
a medical equipment, a microwave or a
wireless LAN device.
- Keep the sound bar and the wireless
subwoofer away from the device (ex.
wireless router, microwave oven, etc.) over
1 m to prevent wireless interference.
1 m
How to affix the ferrite
core
Ferrite core may not be provided depending on each
nation' s regulations.
Affix the ferrite core for power
cord
You must affix a ferrite core in order to reduce or
eliminate electrical interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the power cord around the ferrite core
twice.
3. Close the ferrite core until it clicks.
Connecting 15
2