Eu Declaration Of Conformity - TESY BelliSlimo GCR 50 27 22 E31 EC Manual

Thank you for your trust as a consumer which you have granted to us by purchasing the electrical appliance with a built-in wireless communication module. The
only condition for using the inbuilt wireless communication module in TESY appliances is to have a device which is able to connect to Wi-Fi networks, and has a
reliable Web browser and internet connection.
Product
Model Name
Frequency range
Rated RF output power
Number of channels
Separation between channels
Modulation type
Antenna type
Protocol
The water heater is designed to operate only in closed and heated premises where the temperature is not lower than 4°C and it is not
designed to operate in a continuous protracted regime.
Hereby, TESY Ltd. declares that the electrical appliance with a built-in wireless communication module - ESP32-WROOM-32 is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
water-heaters/.
ORDER OF THE STEPS FOR CONNECTING THE INBUILT WI-FI MODULE IN A
TESY APPLIANCE TO THE INTERNET
/QUICK START
Registration in MyTESY app
Do
1. wnload and install MyTESY app. You can scan the QR codes suitable for
your smart device from fig.A.1
2. Launch the application. You can change the application language from the
drop-down menu to the right of the TESY logo.
It is necessary to register in the MyTESY application.
•
If you already have one, go directly to the button "Already a member? Sign
in ".
•
If you are a new user, select "Sign up in MyTESY" via the "Sign up in MyTESY"
button.
3. New user registration
•
Complete the registration form with a valid e-mail address, password and
your names.
•
Press the "Sign up in MyTESY" button.
4. On the next screen, you have to log in to your newly registered account by:
•
entering your e-mail address and password;
•
Press the "LOG IN" button to enter the application.
THE MAIN SCREEN OF THE APPLICATION
/QUICK START
Dashboard
Personalise your user profile;
1.
Add different TESY appliances;
2.
Control the appliances in the list of Devices and monitor their
3.
current status;
List of notifications related to the operation of the appliances .
4.
Status indication of the appliance:
5. "ON / OFF" button
- the appliance is turned on (red button). Press the button to turn the
appliance off;
- the appliance is turned off (greem button). Press the button to turn the
English
INSTRUCTIONS FOR OPERATION OF ELECTRIC WATER HEATER VIA THE INTERNET
SPECIFICATION OF ΤΗΕ BUILT-IN WIRELESS COMMUNICATION MODULE (WI-FI)

EU DECLARATION OF CONFORMITY

��
/
��
/
Wi-Fi module
ESP32-WROOM-32
2. 412 - 2.484 GHz
20 dBm
13
22 MHz
OFDM
PCB/3.4bBi
ΙΕΕΕ802. 11 b/g/n20/n40
https://tesy.com/products/electric-
appliance on;
6. Appliance state:
•
Active – the device is switched on.
•
Inactive - the device is in "Stand By" mode
Current mode:
7.
•
Manual;
•
Program;
•
ECO;
•
BOOST;
•
Vacation.
8. Appliance status:
•
Heating;
•
Ready.
9. Information about the current amount of hot water / temperature;
10. Information about the set amount of hot water / temperature.
Custom app settings.
To configure your account press the
of the app.
On the screen you will see the parameters that can be changed at any
time, as well as various useful information.
11. Account Details
This menu displays yours registration data for MyTESY - e-mail address and your
name. Here you can change your language settings by selecting your preferred
language for the mobile app.
12. Change password.
With this feature, you have the option to change your password in case you
have forgotten it or for greater security. On the Change Password page, enter
the new password. To save the new password, select the "Confirm" button.
13. TesyCloud.
This feature is only for users with a registered account on the TesyCloud app.
To manage your appliances registered in the TesyCloud app (convectors CN03,
CN04 and all models of electric water heaters with Internet control) through the
MyTESY application, complete the following steps:
•
From the "Settings" menu, select the "TesyCloud" option.
EN
button on the main screen
27