Advertisement
ADVANCE INSTALLATION – DISTRIBUTION MATRIX
[1] Connect one end of the optical cable (Toslink) to the output port on the source component (DVD,
CD player, etc.). Connect the opposite end to the CPLTCX device.
[2] Connect one end of the coaxial cable to the input port of the digital audio distribution device (In
this case, an HD44CC5). Connect the opposite end to the CPLTCX device.
[3] Connect one end of the optical cable (Toslink) to the input port of the digital speaker system.
Connect the opposite end to the CPLCT device.
[4] Connect one end of the coaxial cable to the output port of the digital audio distribution device (In
this case, an HD44CC5). Connect the opposite end to the CPLCT device.
[5] Connect the power supply to the CPLTCX. A red pilot indicates the CPLTCX is active for use.
[6] Connect the power supply to the CPLCT. A red pilot indicates the CPLCT is active for use.
[7] System is now ready for use.
08905096A
- 2 -
Advertisement
