Advertisement
ENERGIZER SOLAR PEAK 2500
Product Display
Parameters
1.
After the product is turned on, short press the main power button and the LED indicator light will go out.
2.
If the product is not used within 2 minutes, the product enters a sleep state and the LED indicator
light turns off automatically. When the product has a load change or operation, the indicator lights up
automatically.
3.
This product cannot be used alone and can only be used in combination with the Energizer Solar Peak
3000 power station.
Switching ON/OFF
After short pressing the power button, the indicator light will illuminate, showing the current operating status light and the
power light. Press the power button for 3 seconds, the expansion battery pack turns off, and the indicator light goes out.
PAGE 03
ENGLISH
Advertisement
