Table of Contents
Advertisement
3.
Select ADD and press SELECT soft
key. The WAYPOINT SETUP screen
displays NAME, LAT, and LONG.
NOTE: WPT 00X is the default waypoint
name.
NOTE: To modify an existing waypoint, select EDIT in Step 3 above and then
select the waypoint name from the list. To delete a waypoint from your
directory, select DELETE, the waypoint to be deleted, and then confirm.
4.
Use the ▲ and ▼ keys to select NAME and then press the SELECT soft key. The
pop-up keyboard displays.
5.
Use the keyboard to enter a name
for the waypoint. Press SELECT
after each letter and then FINISH
when done. The WAYPOINT SETUP
screen displays again with the new
name. Press SAVE to keep that
entry.
NOTE: The name was not changed in
this example.
Select LAT and press SELECT. Use
6.
the ▲ and ▼ keys to enter each
number (followed by SELECT after
each number entry). Press SAVE to
keep that entry.
E-54
MHS338BT Radio Owner's Manual
Advertisement
Table of Contents
