Rechargeable Battery; General Information; Measuring Values - Leica CALONOX 2 SIGHT Quick Start Manual

RECHARGEABLE BATTERY

• New batteries must be charged before initial use to be ready for activation in the device. A full
charge is recommended, as the batteries are delivered in an only partially charged state.
• Never throw batteries into a fire as they may explode.
• Keep the battery away from sources of heat in case of leakage or if you smell burning. Leaked
fluid can catch fire!
• Make sure that the power socket is freely accessible at all times.
SENSOR
• Cosmic radiation (e.g. during flights) may cause pixel defects.
Wi-Fi/BLUETOOTH
• Wirelessly transmitted data (images) may be intercepted by third parties. The safety of data
transmitted via wireless networks cannot be guaranteed.
• Do not use the device in areas where it may be exposed to magnetic fields, static electricity, or
radio frequency interference (RFI).
• Do not use the transmitter in the immediate vicinity of microwave ovens or other devices, where
the reception of wireless signals may be disrupted by magnetic fields, static electricity, or RFI.
Other wireless devices operating in the 2.4 GHz band in the vicinity of the device may cause
mutual interference.
• The Bluetooth transmitter operates in the 2.4 GHz frequency band. The standard output strength
is approx. 3.16 mW.
IMPORTANT INFORMATION

GENERAL INFORMATION

• Do not attempt to take the device apart yourself. Repairs must only be carried out by authorized
workshops.
• Low temperatures impair battery performance. Carry the device close to the body in cold condi-
tions and use a fresh battery.
• Do not touch the glass surfaces with your fingers, especially if you have previously applied hand
cream, insect repellent, etc. These substances may contain chemicals that damage or destroy
the coatings on the glass surfaces.
• When used as a hand-held device, a carrying strap should generally be used to prevent
possible damage to the device from falling.

MEASURING VALUES

• Regardless of whether this information is used, you are responsible for assessing the relevant
hunting situation.
• Powerful electric fields, e.g. emanating from radar systems, may cause errors and/or faulty
values.
• The geomagnetic field can similarly cause value deviations.
®