Regulatory Information; Safety Remarks - Leica CALONOX 2 SIGHT Quick Start Manual

REGULATORY INFORMATION

You will find the manufacturing date of your
product on the stickers of the packaging. The
date format is year/month/day.

SAFETY REMARKS

WARNING
Non-compliance with the following points may result in serious injury or death.
LASER
• The use of any operations not described in this manual or any alterations on the device may
result in hazardous radiation exposure.
• The laser device is active and emitting an invisible laser beam as long as the display in the eye-
piece is active. Never point the laser focusing optics at a person or animal.
• Do not press any function button while aiming at a human eye or while looking into the optics
from the lens side.
• Never aim the laser at an eye.
• Do not aim the laser at people or animals.
GENERAL INFORMATION
• Avoid looking directly at bright light sources with your Leica Calonox 2 to prevent eye injury.
CAUTION
Non-compliance with the following points may result in personal injury or damage to
the device.
LASER
• Avoid touching the function button while the distance measurement function is not in use to
prevent an accidental activation of the laser beam.
• Do not attempt to disassemble, reassemble or repair Leica Calonox 2 yourself. Emitting laser
radiation may pose a serious health risk. The manufacturer warranty is void, once a device was
disassembled, reassembled or repaired.
• Stop using the device immediately if the device housing is damaged or the device emits a
strange sound after a fall, or behaves unexpectedly for any other reason.
GENERAL INFORMATION
• Keep the device out of the reach of small children.
• Do not use the device while walking. You might trip and fall.
• Do not attempt to disassemble or modify the device; exposing the internal electronics may
cause damage, injury or electric shock.
▸ Enter the main menu by press and hold the menu button
▸ Go down in the main menu with the "arrow down" button to the
point "Settings"
▸ Activate Settings sub-menu by pressing menu button
▸ Go down in the Setting menu with the "arrow down" button to the
point "Info"
▸ Enter the Info page with pressing the menu button