CUBETAPE C200L Quick Start Manual

SET OUTPUTS
Dimensional output is set to nearest whole inch by
default. To select alternative outputs scan one of
the Output codes below with the C200L.
Output 0.25 Output 0.5
Output Nearest 1 Output Next 1
SET SUFFIX
Select preferred suffix for use with
Dimensional (DIM) and General (GEN) items.
Suffix Dim CR Suffix Dim TAB
Suffix Gen CR Suffix Gen TAB
Additional suffixes and prefixes available at
www.cubetape.com/support
REFERENCES AND RESOURCES
FAQ URL
Shortcuts URL ScanStik URL
For Scan to Pair and NFC Pairing instructions go to
or Configuration guide.
FAQ URL
For full manual go to
www.cubetape.com/support
For support email
support@cubetape.com
US DEFAULTS
Comms Direct (HID) by RF Dongle
Timeout 10 minutes
Suffix DIM TAB
Suffix GEN TAB
Units inches
Output Nearest inch
To return to C200L US default settings at any
time scan barcodes below.
C200L US Wireless Defaults
C200L
US Quickstart Guide
IN THE BOX
C200L
USB Cable RF Dongle
C200L
US Quickstart Guide
IN THE BOX
C200L
USB Cable RF Dongle Charge Cradle
(Optional Extra)
Bigfoot
Silicone Tip Quickstart Guide ScanStik
Scan Registration QR code or visit
Bigfoot www.cubetape.com/register to register your device
Silicone Tip Quickstart Guide
Scan Registration QR code or visit
to register your device.
www.cubetape.com/register
Charge Cradle
(Optional Extra)
ScanStik