Select I Nputsource - Vizio SV421XVT User Manual

VlZIOSV421XVT & SV471XVT U serManual
Select t he Input S ource fortheHDTV bypressing
theINPUT buttonontheremote control.Pressing
thisbutton will cycleyouthrough thefollowing
options: TV,AV1,AV2,Component1, Component2,
RGB,HDMI1, HDMI2, H DMI3, a ndHDMI 4 .
Main
Turn on your Cable Box, VCR, External TV Tuner or
Satellite Receiver and you will see a picture on your
HDTV. If there is no picture, make sure you have
selected the correct input on the HDTV.
If the selected input is RF, set the HDTV to either Channel 3 or Channel 4 matching the channel
which has been selected on the back of the VCR, Cable Box, External TV Tuner or Satellite Receiver;
please refer to Owner or User's Manual of such equipment for details.
Note: Your HDTV will display the television station or program selected by the cable box, VCR, external
tuner, or satellite receiver. Use the remote control that came with that component to change programs or
channels. If the service being used is the one which setup includes a box with two outputs for two
different (distant) rooms, then scanning channels will help you to find the signal. The channel to be
selected varies from provider to provider. You may have to call your provider to get the specific channel
when using your HDTV. Some examples of these channels are 105, 106, 115, and 116.
36
www.VlZlO.com