Vizio SV421XVT User Manual page 35

VIZIO SV421XVT & SV471XVT User Manual
h. The Tuner screen will be
displayed. If you are using Cable
Service (not a box), press the •
button on the remote control to
choose CABLE.
i. Press the OK button on the
remote control to go to the next
screen.
j. The ChanneIScan screen will be
displayed; default choice is Scan.
Not÷: If a set-top box from your cable or satellite
service company is being used you do not need to
scan for channels. Press the OK button on the
remote control and select Skip Scan.
k,
Press the OK button on the
remote control to start the search
for available channels. The screen
will show the progress of the
search for Analog (NTSC) and
Digital (ATSC) channels.
Note: If you select Skip Scan, you can scan
channels at a later time by selecting the TV input,
then going to the Menu and selecting the Auto
Search option in the TV menu.
No_e: DYV(@ta b_'oadcast s /(tava abe n a
a_eas Refe_ 1o www.antennaweb.org o gel
_IO_ssationabes avaab y syo aea _ypeof
a_en aand w_}chdi_eclos/opoi__I _yo_ _
as[enna Xsec/'ane avs_ abtty'i_ougscsNe
depesds_,,ponw_cscsa!isesyoc cabeopeao_ _
suppes nCIea_QAM cossu[yo_cabe
opeao_ _fo no_e/fo_rsation,
When finished, the Complete
screen will be displayed to inform
you that the HDTV has completed
the Initial Setup. Press the OK
button on the remote control to
exit and begin watching TV.
P_easeselect your input source:
Cable
_Back _ Select _ Ne_ _ Exit
P_ease connect your cable or
antenna to the DTVtTV input
Skip Scan
Back _ Select _ Next _ Exit
Channel Scan wilt take a few
minutes to complete.
Status:Scanning,,,
Analog Channels:7
Digital Channels:2
Ex_
CongratuEations!!
Initial Setup completed
Back Exit
Version 4/16/2009 35
www.VlZIO.com