Table of Contents
Advertisement
Available languages
Available languages
Key Tone (sound feedback)
This function allows the key tone to be activated or deactivated.
Important: In the case of fault or warning, the unit will still
produce an audible alarm even if the tone has been
E
deactivated.
N
G
Brightness setting in standby mode
L
I
S
This function allows the display brightness to be adjusted in stand-by
H
mode.
Important: Every time a key is pressed, the display brightness
is at 100% while after 10 seconds of inactivity, the brightness
will return to the level set with this function (0-100%).
-
Select the
or
key until Setting
Buzzer is displayed and press
confirm.
-
Select with the
or
key ON or
OK
OFF and press
to confirm.
-
Select the
or
key until Setting
Bright is displayed and press
confirm.
-
Select with the
or
key the
numerical value (%) and press
confirm.
Contrast setting
It allows the system information to be displayed.
OK
to
System Information
It allows the system information to be displayed.
OK
to
OK
to
40
-
Select the
or
key until Setting
Contrast is displayed and press
confirm.
-
Select with the
or
key the
numerical value (%) and press
confirm.
-
Select the
or
key until System
Info is displayed and press
OK
confirm.
Within the function it is possible to
display in the following order:
- Model name;
- Software version;
- Installation date;
- Serial number;
- Accumulated work hours.
Ver.05_13.12.22
OK
to
OK
to
E
N
G
L
I
S
H
to
Advertisement
Table of Contents
