Programming Mode - Kawai Heritage 200 Classic Instruction Manual

B. Leaving the programming mode
( Sten I Press the CHORUS button.
Tee EE
CHORUS — SPLIT
The flashing will stop and you will return to the tone in effect when you entered
the programming mode.
Cz You can also continue into another programming mode by pressing anoth-
er TONE SELECTOR button without pressing the CHORUS button.
2 | Changing the SPLIT Point
Make sure the piano is in the programming mode.
Press the SPLIT button so that it flashes, indicating that the piano is awaiting a
SPLIT point specification.
Later
= -E_a-
CHORUS — SPLIT
( Step 3) Press the key that you wish to be the lowest note for the UPPER range. For
example, pressing the lowest key on the keyboard makes the entire keyboard
UPPER.
me ETE ECCCE CEC RCE om Gi
Lower Tone Upper Tone
23