Wired Connection; Setup Date And Time - Wintal MICRO4PRO User Manual

Wired Connection

1� Plug in an ethernet cable (Cat5e or Cat6 and above) to the back of the Micro4Pro and to your existing router
2� Wait for 10-15 seconds and on the home screen, click on the network icon (
that gives you the FTP connection details� The IP should match your existing network setup�

Setup Date and Time

If the date and time displayed on the bottom right of the homescreen is incorrect,
follow these steps to setup the correct date and time�
1� Using the remote control, click on the settings icon on the top right (
2� Scroll down to Preferences > Date & time
3� Ensure Automatic date & time is set to Use network-provided time
If you would like to manually adjust the date and time turn Automatic date & time
to Off and set your date and time values manually�
On this screen, you can also set your desired time zone and toggle between 24-
hour format�
Wintal Micro4Pro User Manual
) and you should get a pop up
)
8 of 15