Magick Woods Elements SB30 Assembly Instructions Manual page 4

Step 4
1. Stand the cabinet upright. Add the frame and door assembly to the cabinet box as shown in the
illustration. Using a Phillips Head screwdriver, rotate the connector clockwise to fasten into
place. Ensure all connectors are locked into place before moving the cabinet.
2. Using a Phillips Head screwdriver, secure the back panel with 5/8" CSK screws as shown in the
illustration. Be careful not to over-tighten as this may damage the product.
Ensure the side gables and bottom shelf are aligned with the grooves in the frame
before tightening the connectors.
4
Need assistance? Contact us at 1.833.748.4846.
5/8" CSK
SCREW
x3