evoheat EVO SOLACE PRO Installation & Operation Manual

Indoor dehumidifier

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVO SOLACE PRO and is the answer not in the manual?

Questions and answers

Summary of Contents for evoheat EVO SOLACE PRO

  • Page 2: Table Of Contents

    5.2.4 Fan Mode ............................. 6 5.2.5 Electric Heating Settings ....................... 7 5.2.6 Keyboard Lock ..........................7 5.2.7 Fault Interface ..........................7 6. Troubleshooting ............................7 7. Wiring Diagram ............................8 8. Maintenance ............................. 8 9. Warranty ..............................9 info@evoheat.com.au 1300 859 933 www.evoheat.com.au...
  • Page 3: Introduction

    EvoHeat unit. Instructions in this manual must always be followed. Failure to comply with these recommendations will invalidate the warranty. Should you have any questions or require technical support, call the EvoHeat office on 1300 859 933 to speak to our team.
  • Page 4: Unit Specifications

    Page 3 Solace Pro Dehumidifier Manual 2. Unit Specifications 2.1 Technical Data Evo Solace Pro Domestic Dehumidifier Rated Capacity at 80%RH - 30°C Air Voltage/Phase 220-240V/1/50Hz Rated Running Current Max. Running Current 19.5 Rated Power Input Max. Power Input 4.26 Refrigerant/Volume R32/1.25kg...
  • Page 5: Safety Instructions

    External parts of the unit can reach temperatures of more than 70°C, never touch it with your hands! The unit must be installed in accordance with national wiring regulations. • *Caution: Single wall heat exchanger, not suitable for potable water connection. info@evoheat.com.au 1300 859 933 www.evoheat.com.au...
  • Page 6: Installation

    4.4 Wall Mounted Installation Insert 5 Expansion Bolts into holes which are bored by a 10mm drill, then, fix the wall suspension bar horizontally. info@evoheat.com.au 1300 859 933 www.evoheat.com.au...
  • Page 7: Operation

    Press the WIND SPEED key for 2 seconds to access the fan mode setting. Use the arrow keys to switch from OFF and ON. • ON: The fan will run continuously OFF: The fan stops when the target humidity is reached. info@evoheat.com.au 1300 859 933 www.evoheat.com.au...
  • Page 8: Electric Heating Settings

    P1 & P2 still exist, disconnect the power to If you require technical support or have a question, call the the unit and try connecting again after 1 hour. EvoHeat Tech Support line on 1300 859 933. info@evoheat.com.au 1300 859 933...
  • Page 9: Wiring Diagram

    3. Set the filter net and the air return grill to the original place and press the limiting pin 4. Clean up the outer unit with a soft and damp rag. To protect the paint coat on the unit, do not use a rough sponge or corrosive detergent. info@evoheat.com.au 1300 859 933 www.evoheat.com.au...
  • Page 10: Warranty

    REGISTER YOUR WARRANTY EvoHeat highly recommend customers complete their warranty details online to ensure efficient warranty claim processing. To register your warranty, scan our QR Code or head to our website and fill in the Warranty Registration Form: https://evoheat.com.au/warranty-registration/...

Table of Contents