Safety - PRO SHOT L1-AS Operation Manual

Safety

Precautions to follow when using any laser.
• Don't stare into the laser beam or view it directly with optical instruments.
• Don't disassemble the laser or attempt to service it.
• Don't use the laser until you have read the instruction manual and you are
familiar with how to operate the laser properly.
U.S. OSHA requirements for operating visible lasers.
• Only qualified, trained employees may install, adjust and operate the laser.
• Laser operators must carry proof of qualification.
• The area of a job site where a laser is being used must be posted with a laser
warning placard.
• The laser should be set up above eye level and never intentionally aimed at
anyone.
• Turn the laser off when it is not being used, such as during lunch hour, at the end
of the day, or during other long breaks in the work.
CAUTION CAUTION
LASER LIGHT
DO NOT STARE
INTO BEAM
635nm - 670nm
CLASS II LASER PRODUCT
A warning placard is included with each
laser which can be attached to the outside
of the carrying case. The case can then be
placed in a visible location near where the
laser is being used in order to meet jobsite
posting requirements.
LASER LIGHT LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
L1-AS
(North America)
L1-AS
(IEC)
4