Slope Setup - PRO SHOT L1-AS Operation Manual

8

Slope Setup

Follow the suggestions in the "initial setup guidelines" section.
Carefully aim the laser using the sights on the top cap. These sights indicate the
direction of slope.
Using the red slope adjustment knob, adjust the slope display to your required
slope. Note that if the laser has finished leveling and H.I. Alert has become active
(see initial controls and displays pg. 2/3) you will need to turn the laser off, then on
again to clear H.I. Alert.
Slope
Alignment
Sights
Slope
Display
Slope
Adjustment
Knob