Milwaukee HEAVY DUTY MXF SC User Manual page 11

TECHNICAL DATA
Type
Input voltage
Input watts
Output voltage
Output current
Charge time with MXF CP203 battery (4.5 (A))
Charge time with MXF XC406 battery (10 (A))
Charge time with MXF HD812 battery (12 (A))
Frequency band(s) of Bluetooth
Maximum radio-frequency power transmitted in the frequency band(s)
Bluetooth version
Weight according EPTA-Procedure 01/2014
Recommended ambient charging temperature
WARNING! Read all safety warnings, instructions,
illustrations, and specifi cations provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fi re, and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY WARNINGS
Do not dispose of used battery packs in the household refuse or by
burning them. MILWAUKEE distributors off er to retrieve old batteries
to protect our environment.
The product can charge the following battery packs only:
Battery Cell type
catalogue no.
MXF CP203 Li-ion
MXF XC406 Li-ion
MXF HD812 Li-ion
Do not try to charge non-rechargeable battery packs with the
product.
Do not store the battery pack together with metal objects (short
circuit risk).
Do not allow metal parts to enter the battery section of the charger
(short circuit risk).
Never break open battery packs and chargers, and store them only
in dry rooms. Keep the battery packs and chargers dry at all times.
The battery clamps of the charger are fed by the mains supply. Do
not touch the product with conducting objects.
Never charge a damaged battery pack. Replace it with a new one.
Before using the product, check the product, cable, and plug for any
damages or material fatigue. Repairs should only be carried out by
authorised service centres.
Use only MXF System chargers for charging MXF System battery
packs. Do not use battery packs from other systems.
The product is not intended to be used or cleaned by persons
with reduced physical, sensory, or mental capabilities, or lack of
experience or knowledge, unless they have been given instructions
concerning the safe use of the product by a person legally
responsible for their safety. They should be supervised while using
DC volts Capacity Cell no.
≤ 3.0 Ah
72 V 20
≤ 6.0 Ah
72 V 2 x 20
≤ 12.0 Ah
72 V 3 x 20
ENGLISH
MXF SC
Battery charger
100-240 V
1200 W
72 V
12 A
≤ 45 mins
≤ 45 mins
≤ 75 mins
2402-2480 MHz
3 dBm
BLE V4.2
8.8 kg
+5 °C – +40 °C
the product. Children shall not use, clean, or play with the product,
that when not in use should be secured out of their reach.
WARNING! The product contains a lithium button/coin cell
battery. A new or used battery can cause severe internal
burns and lead to death in as little as 2 hours if swallowed or
enters the body. Always secure the battery cover. If it does not
close securely, stop using the product, remove the batteries, and
keep it away from children. If you think that the batteries may have
been swallowed or entered the body, seek immediate medical
attention.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fi re, personal injury, and
product damage due to a short circuit, never immerse the product,
battery pack, or charger in fl uid or allow fl uid to fl ow inside them.
Corrosive or conductive fl uids, such as seawater, certain industrial
chemicals, and bleach or bleach-containing products, etc., can
cause a short circuit.
SPECIFIED CONDITIONS OF USE
The product charges MXF CP203, MXF XC406 and MXF HD812
MILWAUKEE Li-ion battery packs.
Do not use the product for any other purpose.
MAINS CONNECTION
Connect the product only to a single-phase AC current supply and
only to the mains voltage specifi ed on the rating plate. Connect the
product to the power supply using only sockets with an earth wire.
CHARGING TIME
Battery catalogue no. Volts
MXF CP203 72 V
MXF XC406 72 V
MXF HD812 72 V
BATTERIES
Battery packs that have not been used for some time should be
recharged before use.
Capacity Approximate
charging time
≤ 3.0 Ah ≤ 45 minutes
≤ 6.0 Ah ≤ 45 minutes
≤ 12.0 Ah ≤ 75 minutes
11