Table of Contents
Advertisement
TO REMOVE:
1.
Press stage opening latch and open stage to lock position.
2.
Pull the used lamp out of the lamp socket.
3.
Avoid touching new bulb or inside of reflector. Finger prints
can affect performance.
4.
Push lamp into socket until firmly seated.
5.
Release stage support, close stage and press until firmly
locked.
6.3
Storage
1.
Controls should be in OFF position.
2.
Store power cord properly.
3.
Protect unit from dust as much as possible.
6.4
Information on Lamp Warranty
Projection lamps are warranted by the lamp manufacturer and
not by the equipment manufacturer. If you have a lamp which
you believe to be defective, contact the manufacturer of that
particular lamp for the appropriate warranty replacement.
General Electric Company
1301 South 19th Street
Mattoon, Illinois 61938
North American Philips
Bank Street
Heightstown, New Jersey 08320
6
Advertisement
Table of Contents
