Table of Contents
Advertisement
Continuous drainage
• Items needed: 19 mm (external diameter) hose.
1
Turn counterclockwise and open the
continuous drainage cover at the back
of the product.
2
Remove the water tank.
3
Insert the drain adapter into the
opening of hose and turn clockwise.
Insert the attached screw to secure it
in place.
4
Turn the end of the hose clockwise to
connect it to the drain adapter.
• Securely connect the hose to avoid leaks.
Hand tighten; then make an additional 1/8
turn with pliers.
5
Reinstall the water tank.
CAUTION
• If you wish to use a commercial hose available in
the market, use a hose whose external diameter
is 19 mm.
• Check if the continuous drainage hose is
connected to the drain adapter on the product
correctly. If the hose fails to connect to the
product's outlet, water may leak when
dehumidification is carried out.
EN
17
Advertisement
Table of Contents
