Table of Contents
Related Manuals for LG MD19GQGA1
Summary of Contents for LG MD19GQGA1
- Page 1 OWNER’S MANUAL DEHUMIDIFIER Please read this manual carefully before operating your set and retain it for future reference. MD19GQGA1 / MD16GQSA1 www.lg.com MFL68026038 Rev.01_011421 Copyright © 2018 - 2021 LG Electronics Inc. All Rights Reserved.
- Page 2 SAFETY PRECAUTIONS SAFETY PRECAUTIONS The following safety precautions are intended to prevent accidental property damage and per- sonal injury through safe and correct use of the product. WARNING Failure to follow the instructions could result in death or serious injury of the user. CAUTION Failure to follow the instructions could result in personal injury or property damage.
- Page 3 SAFETY PRECAUTIONS • Keep the air inlet and outlet free from obstructions. Failure to do this could result in poor performance or malfunction. • Do not cover the power cord with a mat etc. If heavy objects are placed on the mat, the power cord underneath could be damaged, causing fire or electric shock.
- Page 4 SAFETY PRECAUTIONS • Turn off the dehumidifier and empty the water tank before moving the dehumidifier. The water could overflow from the tank, wetting household items or causing fire or electric shock. • Pull out the power plug if you will not be using the product for an extended period. Failure to do this could result in product malfunction or fire.
-
Page 5: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS SAFETY PRECAUTIONS SMART FUNCTIONS LG ThinQ Application QUICK START Smart Diagnosis NAME OF EACH PART HOW TO CLEAN Front side How to clean the exterior and inlet of Back side the dehumidifier Display Panel... -
Page 6: Quick Start
QUICK START QUICK START Dehumidifier efficiency varies depending on room tempera- ture and relative humidity. • A lower temperature and lower relative humidity will reduce the moisture removal rate. • The compressor operates in dehumidification mode only when the set humidity is lower than the room humidity. -
Page 7: Name Of Each Part
NAME OF EACH PART NAME OF EACH PART Front side Display Start/stop button Outlet Louver It adjusts the direction of the wind. Water tank lid Water tank It stores dehumidified water. Back side Hose cover Pre-Filter Inlet It absorbs the air and moisture in the room. -
Page 8: Display Panel
NAME OF EACH PART Display Panel Buttons to turn off Wi-Fi Start/stop Wind strength control Operation mode Humidity control Ionizer Wi-Fi Bucket full indicator lamp indicator lamp Humidity &Off timer Off Timer display Timer indicator lamp Start/Stop button It is used to start and stop the product operation. Operation mode button It is used to switch to Smart dehumidification mode, Jet dehumidification mode, Silent dehumidification mode,... -
Page 9: Checklist Before Usage
CHECKLIST BEFORE USAGE CHECKLIST BEFORE USAGE Dehumidification amount changes according to indoor temperature and relative humidity. - If the temperature or relative humidity is low, dehumidification amount is decreased. - Dehumidification is performed with compressor operation only when the desired humidity is lower than the current humidity. -
Page 10: How To Use
HOW TO USE HOW TO USE Push start/stop button. - The louver opens and smart dehumidification starts. But, if no other button is pressed (Mode, Speed etc.), the desired humidity will change to 50% after 30 minutes of continuous operation. - The current humidity is displayed on The humidity &... -
Page 11: Smart Dehumidification
HOW TO USE To stop the product, press start/stop button one more time. - Louver closes. - All lamps will be turned off and the product stops. CAUTION • If the product started again right after stopping the operation, dehumidification operation does not start for about 3 minutes to protect the compressor. -
Page 12: Jet Dehumidification
HOW TO USE Jet Dehumidification When you want to remove indoor moisture quickly - Press Operation Mode button to select Jet dehumidification mode. - Under Jet dehumidification mode, it will change to Smart dehumidification mode after 60 minutes. Even if it is under power wind (Po) operation, high wind indicator lamp is lighted. - When it is in Jet dehumidification mode, if you select Humidity control button or Speed button, it switches to Smart dehumidification. -
Page 13: Spot Drying
HOW TO USE Spot Drying When you need spot drying of shoes, closet, etc. - Press Operation Mode button to select Spot drying mode. - In Spot drying mode, the louver is closed. - Wind amount is set to high wind, and humidity control & the wind amount is not operational. - The current humidity is displayed in the humidity display window. -
Page 14: Laundry Drying
HOW TO USE CAUTION • Do not move the dehumidifier by holding the extension hose. Dehumidifier may fall down and cause injury. • If spot drying operation is used for long period of time, the operation may stop to protect the product. -
Page 15: Ionizer
HOW TO USE Ionizer When you want to remove harmful bacteria in the air - Select it by pressing Ionizer button. - It removes harmful material in the air such as bacteria, virus, etc. using ionized air. - You can use Ionizer function and dehumidification function at the same time. - Ionizer can be used at any time regardless of dehumidifier function. -
Page 16: Bucket Full
HOW TO USE Bucket full When the water tank is full, operation automatically stops, bucket full lamp is lighted, and warning buzzer sounds. (Warning buzzer will sound one more time after 1 minute.) - When the full water is detected, the dehumidification function immediately stops, and fan oper- ates for 5 minutes to remove the remaining condensed water. -
Page 17: Off Timer
(Execute LG ThinQ Application → Select the dehumidifier product → Make reser- vation) * For more detailed description on the use of LG ThinQ, refer to the Using the Smart Functions section. * You can set the timer time through app. -
Page 18: Lock Function
HOW TO USE Lock Function Press the Ionizer button for 3 seconds. - If you take off your hand when the buzzer sounds 1 time after 3 seconds, it enters Lock function. - “CL” display in the display panel is maintained for 5 seconds. - It maintains the operation state at the time of setting the function until the function is turned off, and there will be no response even if a button is pressed. -
Page 19: How To Empty Water Tank
HOW TO USE How to empty water tank Hold the top handle of the water tank and Open the drain lid of the water tank. softly take it out. Drain lid Water tank handle First insert the bottom part of the water tank Pour out the water inside the water tank. -
Page 20: How To Continuous Drainage Setup
HOW TO USE How to Continuous Drainage Setup - Items Needed: 16mm (Inner diameter) hose nearby sink or drain. Separate the water bucket from the product. Then open the rubber cap connected to the continuous drain at the back of the product. Insert the water bucket into the product. -
Page 21: Product Registration Through Wi-Fi Function
2. Check the information (Wi-Fi network name, password) of AP at the place where the de- humidifier is installed. 3. Proceed with the product registration after log-in through the smart phone’s LG ThinQ app. • For Wi-Fi function registration, according to app guide, press Speed button for 3 or more sec-... -
Page 22: Smart Functions
• The application is subject to change for • LG ThinQ is not responsible for any appliance improvement purposes without network connection problems or any faults, notice to users. - Page 23 This offer is valid to anyone in receipt of this information. Installing the LG ThinQ Application Search for the LG ThinQ application from the Google Play Store or Apple App Store on a smartphone. Follow instructions to download and install the application.
-
Page 24: Smart Diagnosis
Fi equipped appliance, it can transmit troubleshooting data to a smartphone using the LG ThinQ application. • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions provided in the LG ThinQ application. -
Page 25: How To Clean
HOW TO CLEAN HOW TO CLEAN How to clean water tank Press the fixing part on both sides of the water How to clean the exterior tank to take out the lid. and inlet of the dehumidifier Soak soft cloth in water, squeeze out water, and wipe the dehumidifier. -
Page 26: How To Clean Pre-Filter
HOW TO CLEAN How to clean Pre-Filter Push Pre-Filter to the right to take it out. Clean the Pre-Filter with vacuum cleaner or soft brush. - If the contamination is severe, wash with water using neutral detergent. (Do not use hot water of 40°C or higher.) - The cleaning period for Pre-Filter is 1 month. -
Page 27: How To Store
HOW TO STORE HOW TO STORE Pull out the power plug from the socket. Completely drain the water remaining inside the water tank. - Separate the water tank lid and wipe the water inside the water tank. Clean the filter. - If it is dried under sunlight, it may be deformed. -
Page 28: Troubleshooting Tips
TROUBLESHOOTING TIPS TROUBLESHOOTING TIPS Is there something wrong with the product? Please check the following before contacting the service center. Problem Check What To Do The product is not - Is the power plug correctly inserted into - Insert the power plug. running. -
Page 29: Product Specifications
Width The exterior and design as well as the product specifications may change to enhance the quality of the product. Model MD16GQSA1 MD19GQGA1 Power AC 220~240V, 50 Hz AC 220~240V, 50 Hz External Dimensions 715 mm X 382 mm X 296 mm...