Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fransgard W-3022
Summary of Contents for Fransgard W-3022
- Page 1 Manual W-3022 Forestry Winch...
- Page 2 Fransgård Maskinfabrik A/S Fredbjergvej 132, Fredbjerg DK - 9640 Farsø Telephone: +45 98 63 21 22 www.fransgard.dk mail@fransgard.dk...
-
Page 3: Table Of Contents
Tabel of Contents Page Technical data ................1 Danger/warning ................2 Technical safety references ............3 Operating instructions ..............6 Lubrication and maintenance ............7 Brake and freewheel brake adjustment ......... 7 Tractor size ................... 7 Instructions for fitting the wire ............8 Pictogram .................. -
Page 4: Danger/Warning
DANGER! Read the instruction manual carefully before starting the machine. It is the owner's responsibility to instruct all potential users and assistants in the use of the machine. Warning! 1. The machine must not be used until the operator knows how to use it. 2. -
Page 5: Technical Safety References
SAFETY INSTRUCTIONS FOR THE USE OF WINCHES FOR TREE CLEARING Avoid accidents at work! The relevant rules for the prevention of accidents from the insurance companies concerned and the instruction manual must be complied with! The winch shall be operated and maintained only by suitable and reliable persons over 18 years of age who are familiar with this work. - Page 6 When felling trees at the root, the traction cable must be attached to the tree before felling begins. For this purpose, the position of the tractor must be chosen in such a way that the distance to the falling tree is at least twice the length of the tree - in case of a pulley with redirected drag at least 1 x the length of the tree - see Figure 3 Avoid staying in the dangerous angle when using a pulley! (redirected drag effect)
- Page 7 Do not approach the logs to unhook the load until the wire has been released by opening the brake! In any case, when using a tractor with a hydrodynamic engine, before leaving the cab to operate the winch, care must be taken to ensure that •...
-
Page 8: Operating Instructions
OPERATING INSTRUCTIONS. Installing the winch: When not in use, the machinery must be placed securely on a firm, level surface so that it does not endanger the surroundings. When coupling the machine, attach the tractor lifting arms to the brackets with the lifting bolts provided, then attach the top bar. -
Page 9: Lubrication And Maintenance
LUBRICATION AND MAINTENANCE: • The PTO shaft should be lubricated at least once a week. • All moving parts are lubricated once a week. • All ball bearings are sealed and are lubricated for life. • Drive chains should be lubricated at least once a year or every 50 hours of operation. Stuctobis®... -
Page 10: Instructions For Fitting The Wire
Instructions for fitting the wire. 12. Thread the wire in pos.1 through the 3 holes pos.2. 12. Then fit the wire holding bracket pos.3... - Page 12 Max. 30°. Max. 30°.
- Page 13 Max. 4 mm...
-
Page 14: Pictogram
Switch off the engine and Read the manual carefully remove the key before repair before starting the machine. and maintenance. Pay attention to the safety instructions. Keep a safe distance from the No persons between the machine. tractor and machine. Stay clear of the machine's Stay clear of tow link turning area.
Need help?
Do you have a question about the W-3022 and is the answer not in the manual?
Questions and answers