Table of Contents
Advertisement
Test signal selection
Selection of the adjustment items
Change of the data value
Adjustment menu mode ON/OFF
Initialization of the memory (QA02)
Reset the count of operating
protect circuit to "00"
Turn off I2C bus communication
"RCUT" selection
"GCUT" selection
"BCUT" selection
"CNTX" selection
"COLC" selection
"UVTT" selection
Automatic A/D Adjustment
(PC, Component, Composite (PAL, NTSC))
Self diagnostic display ON/OFF
Selecting the Adjusting Item
Every pressing of CH
order of table below. (
SETTING & ADJUSTING DATA
[ SERVICE MODE ]
ADJUSTING ITEMS AND DATA IN THE SERVICE MODE:
Note:
The image system data of RCUT-BDRV is different by each image format.
The PAL value is indicated in the table.
Never adjust H.POS and V.POS except PAL/WIDE mode.
file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.787\32W...
CH
Volume
MENU button (on TV)
CALL + CH button on TV (
CALL + CH button on TV (
CALL + CH button on TV (
1 button
2 button
3 button
4 button
5 button
6 button
7 button
9 button
button in the service mode changes the adjustment items in the
button for reverse order)
(on TV or remote control)
+/- (on TV or remote control)
)
)
)
Стр. 3 из 18
02.05.2015
Advertisement
Table of Contents
