Table of Contents
Advertisement
Progress status is "WRITING".
6) Progress status is changed "OK" and power cycle (automatically). Then QA02
initialization has been completed.
7) Enter the service mode and select version check mode. Confirm if model name and
model id set is correct. If not, repeat steps 1) to 6).
Note:
In case initialization by setting wrong MODEL ID is done, there is a possibility of
abnormal display.
8) Set I2C check function of TVOP to enable.
9) Check the picture carefully. If necessary, adjust any adjustment item above.
Perform "Auto tune" on the ownerЃfs manual.
MODEL ID (HEX)
Model name Panel vender
0x01
32WLT68
0x02
37WLT68
0x03
42WLT68
0x04
32WL68P
0x05
37WL68P
0x06
0x07
0x08
0x09
0x10
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.787\32W...
Europe
AUO
AUO
AUO
AUO
AUO
Стр. 8 из 18
02.05.2015
Advertisement
Table of Contents
