Table of Contents
Advertisement
Test signal selection
Selection of the adjustment items
Change of the data value
Adjustment menu mode ON/OFF
Initialization of the memory (QA02)
Reset the count of operating
protect circuit to "00"
"RCUT" selection
"GCUT" selection
"BCUT" selection
"CNTX" selection
"COLC" selection
"UVTT" selection
Automatic A/D Adjustment
(PC, Component, Composite (PAL, NTSC))
Self diagnostic display ON/OFF
Selecting the Adjusting Items
Every pressing of CH
button in the service mode changes the adjustment items in the
order of table below. (
button for reverse order)
SETTING & ADJUSTING DATA
[ SERVICE MODE ]
ADJUSTING ITEMS AND DATA IN THE SERVICE MODE:
Note:
The image system data of RCUT-BDRV is different by each image format.
The PAL value is indicated in the table.
Never adjust H.POS and V.POS except PAL/WIDE mode.
CH
(on TV or remote control)
Volume
+/- (on TV or remote control)
MENU button (on TV)
CALL + CH button on TV (
)
CALL + CH button on TV (
)
1 button
2 button
3 button
4 button
5 button
6 button
7 button
9 button
Advertisement
Table of Contents
