System Event Log - Gigabyte R283-S96-AAE1 User Manual

5-4-1 System Event Log

Parameter
Enabling / Disabling Options
SEL Components
Erasing Settings
Erase SEL
When SEL is Full
Custom EFI Logging Options
Log EFI Status Codes
Description
Change this item to enable or disable all features of System Event
Logging during boot.
Options available: Enabled, Disabled. Default setting is Enabled.
Choose options for erasing SEL.
Options available: No,
Yes, On next reset,
Yes, On every reset.
Default setting is No.
Choose options for reactions to a full SEL.
Options available: Do Nothing, Erase Immediately, Delete Oldest Record.
Default setting is Do Nothing.
Enable/Disable the logging of EFI Status Codes (if not already converted
to legacy).
Options available: Disabled, Both, Error code, Progress code. Default
setting is Error code.
BIOS Setup
- 101 -