–
Mount the washer and splint
V01877-10
–
Position the frame protectors on both sides.
–
Mount and tighten screws
Guideline
Screw, frame protec-
tor
–
Mount and tighten screw
Guideline
Screw, frame protec-
V01881-10
tor
–
Mount the cable ties.
(All Six Days models)
–
Install the engine guard. (
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
–
Attach the stickers included in the scope of supply (optional).
–
Set kilometers or miles. (
–
Set the combination instrument. (
–
Set the clock. (
–
Refuel. (
p. 37)
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
–
Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.
Info
Transport mode must be deactivated to be able to start
the motorcycle.
co
.
cp
.
M5
3 Nm (2.2 lbf ft)
cq
with washers.
M5
3 Nm (2.2 lbf ft)
p. 35)
p. 38)
p. 38)
p. 39)
SETUP 2
19