Sharp QT-70H Service Manual page 6

DISASSEMBLY
Caution on Disassembly
Follow the below-mentioned notes when disassembling the
unit and reassembling it, to keep its safety and excellent
performance:
1. Take cassette tape out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit and remove
the batteries from the unit.
4. Take sufficient care on static electricity of integrated
circuits and other circuits when servicing.
PARTS TO BE REMOVAL
REMOVED
Front cabinet Knob....... (A)x8 | et
Open the
cabinet. ..... (C)
Socket ...... (D)x1
Mechanism block
Tape counter
drive belt .... (E)x1
Screw ...... (F)x4
Socket ......
3 Each P.W.B should be removed until the parts to be ex- ~* a
changed can be removed when servicing. If the parts to be \ — /
exchanged are in the exchangeable condition, the rest of "a
P.W.Bs need not to be removed.
\
es ) CY Is
Tuner P.W.Board | Screw ...... (G)x 1 | A &
Tipiecel @ aes oO) ©) G < y (G)x 1
Audio P.W.Board Screw ...... (J)x4 66 mf (E)x 1
5 W
Mechanism block
Figure 6—4
(A)x 5
Figure 6—1
Audio P.W.Board
Figure 6—6