Advertisement
@ Camera mounting screw holes (1/4")
These screw holes are used to install the camera on a
mount or PAN/TILT UNIT.
Use either of the two holes
according to the situation.
@ Camera mounting bracket fixing screws (three)
© Camera mounting bracket
The camera mounting bracket is mounted on the bottom of
the camera at the factory.
It can be installed on the top of
the camera if necessary.
Fit the mounting bracket on the
top of the camera head with the three screws Qe.
© Lens mount
This mount is used to install a C-mount lens (1/3, 1/2, 2/3,
1 inch) or CS-mount lens (1/2, 1/3 inch)
@ [BF LOCK] Back focus locking screw
This screw locks the back focus adjustment mechanism.
CONTROLS, CONNECTORS AND INDICATORS
a)
@ Camera mounting screw holes (1/4")
These screw holes are used to install the camera on a
mount or PAN/TILT UNIT.
Use either of the two holes
according to the situation.
@ Camera mounting bracket fixing screws (three)
© Camera mounting bracket
The camera mounting bracket is mounted on the top of the
camera at the factory. It can be installed on the bottom of
the camera if necessary.
Fit the mounting bracket on the
bottom of the camera head with the three screws Qe.
@ Lens mount
This mount is used to install a C-mount lens (1/3, 1/2, 2/3,
14 inch) or CS-mount lens (1/2, 1/3 inch)
@ [BF LOCK] Back focus locking screw
This screw locks the back focus adjustment mechanism.
@ Back focus adjustment ring
This ring is used to adjust the back focus and change the
lens mount method.
Loosen screw @ to turn the ring,
and tighten the screw after adjustment.
@ [DC IRIS} DC iris connector
Connect an auto-iris lens that does not contain an EE
amplifier. If the lens cable has a different type of plug, use
the supplied 4-pin plug.
© [LEVEL] Sensitivity adjustment volume
Adjust the brightness of the image when the DC iris con-
nector @ is used.
Monitor screen
|
LEVEL turning direction
Too bright
Counterclockwise (Towards L)
Too dark
Clockwise (Towards H)
JVC
COLOR
VIDEO CAMERA
@ Back focus adjustment ring
This ring is used to adjust the back focus and change the
lens mount method.
Loosen screw
@ to turn the ring,
and tighten the screw after adjustment.
@ [DC IRIS] DC iris connector
Connect an auto-iris lens that does not contain an EE
amplifier.
If the lens cable has a different type of plug, use
the 4-pin plug supplied.
© [LEVEL] Sensitivity adjustment volume
Adjust the brightness of the image when the DC iris Con-
nector @ is used.
Monitor screen
|
Too bright
Too dark
LEVEL turning direction
|
Counterclockwise (Towards L)
Clockwise (Towards H)
Advertisement
