Advertisement
2.4
GENERAL SETUP
Hook up the equipment as shown in the figure.
75Q
terminator
Vectorscope
POWER SUPPLY
AC 24V*
|
Waveform monitor
* TK-CB01EG is AC 230V supply.
TK-C600
REAR PANEL
VIDEO OUT
PERSONAL COMPUTER
(PC/AT compatible capable
Color monitor
REAR PANEL
VR401
VR302
VR301
©,
LEVEL
Jvc
COLOR VIDEO CAMERA TK-C601
SWw301
2.6
PROGRAM EXECUTE
e SW301 (TERMINAL BOARD)
N : NTSC
P :PAL
* VR301, VR302, VR401 — Mechanical center
/BW
Set if the monitor is Black & white.
position.
/COM2
Set if a serial mouse
is connected to the
COM1 serial port to allow camera data com-
municate via COM2. If not specified, COM1
becomes the main communication port auto-
matically.
3. At the "Welcome"
message, click <OK>
or press [EN-
TER] key.
Follow the message appearing on the display to prepare
and execute each setting.
Advertisement
