Cleaning And Maintenance; Appliance Front And Control Panel; Interior Of The Warming Drawer - Progress DPGS14M User Manual

CLEANING AND MAINTENANCE

Cleaning is the only maintenance acti-
vity that is generally required.
WARNING! The warming drawer
must be disconnected from the
power supply before cleaning.
Unplug the device from the socket
or isolate its power supply circuit.
Do not use harsh or abrasive
cleaning products, scouring pads/
sponges or sharp objects, since
this could cause stains or scra-
tches.
Never use high pressure or steam
jet cleaning appliances.
Appliance front and control
panel
The warming drawer can be cleaned using
just a damp cloth. If it is very dirty, add few
drops of washing-up liquid to the water.
Wipe the surfaces dry using a dry cloth.
For stainless-steel fronted warming
drawers, special products for stain-
less-steel surfaces can be used.
These products prevent the build-up of dirt
on such surfaces. Apply a thin layer of this
product on the surface using a soft cloth.
On aluminium fronted warming drawers,
use a delicate glass cleaning product and
a soft, lint-free cloth. Wipe horizontally
without applying.

Interior of the warming drawer

Clean the interior of the warming drawer
regularly using a damp cloth. If it is very
dirty, add few drops of washing-up liquid to
the water
Wipe the surfaces dry using a dry cloth.
Avoid water entering the air circulation
opening.
Only use the warming drawer again when
it is completely dry.
Non-slip base
The non-slip surface mat can be removed
to facilitate cleaning of the drawer.
The mat can be cleaned by hand using
hot water with a few drops of washing-up
liquid. Dry thoroughly.
The non-slip mat should only be replaced
when it is completely dry.
9