Progress DPGS14M User Manual page 5

Cleaning
• Do not use harsh abrasive cleaners
or metal scrapers/scourers to clean
the device since they can scratch the
surface.
• Do not use steam cleaners to clean the
appliance.
• Do not use high pressure or steam jet
cleaning devices. The steam may affect
electrical components and cause a
short circuit. The steam pressure may
also cause damage to the appliance's
surface and components in the long
time.
Repairs
• If the appliance's power supply cable
is damaged, it must be replaced by the
manufacturer, by an authorised techni-
cian or by a qualified electrician in order
to negate any potential hazards.
WARNING! The appliance must
be isolated from the electricity
supply when installation and
repair work is being performed.
To disconnect the appliance from
the current, one of the following
conditions must be met:
– The relevant fuses / circuit brea-
kers at the switchboard must be
disconnected.
– The plug should be removed
from the socket. To remove the
plug from the socket do not pull
on the electric cable but rather
pull out the plug itself directly.
WARNING! Repairs and mainte-
nance, especially of live compo-
nents, must only be performed by
technicians authorised by the ma-
nufacturer. The manufacturer and
retailer do not accept responsibility
for any injury to people or animals
or damage to personal property as
a result of repairs and maintenan-
ce carried out by non-authorised
personnel.
WARNING! Repairs undertaken
during the warranty period must
only be performed by technicians
authorised by the manufacturer.
If this is not the case then any
damage resulting from the repair
in question shall be excluded from
the guarantee
5