Installation; Electrical Connection - Progress DPGS14M User Manual

The warming drawer should only be in-
stalled in combination with the appliances
specified by the manufacturer. If it is fitted
in combination with other appliances, the
guarantee will be void since it is impossi-
ble to guarantee that the warming drawer
will work correctly.

Installation

WARNING! Refer to the installa-
tion instructions supplied separa-
tely.
Installing the warming drawer in
combination with another applian-
ce requires be a fixed intermediate
shelf in the carcase to support the
weight of both appliances.
The appliance to be installed in
combination with the warming
drawer will be installed directly on
top of it.
Follow the instructions given in
the corresponding instruction and
installation booklet for installation
of the combined appliance.

Electrical connection

Electrical installation must be performed
by a qualified electrician.
Before connecting the warming drawer to
the mains electricity supply, check that the
voltage and frequency of the mains supply
matches that shown on the data plate
inside the appliance.
The electrical connection should be made
via an omnipolar switch rated for the cur-
rent capacity with minimum 3 mm contact
separation, in order to provide isolation in
emergencies or when cleaning the war-
ming drawer.
The connection must be suitably earthed.
WARNING! The warming drawer
must be earthed.
If the appliance flex requires
replacement, contact Technical As-
sistance or an authorised service
centre, as specialised tools are
required.
The manufacturer and retailer
do not accept responsibility for
any injury to people or animals or
damage to personal property as a
result of failure to follow the sup-
plied installation instructions.
11