LG WT8600C Series Owner's Manual page 38

38 SMART FUNCTIONS
Then, an update notification will be sent to
your smartphone.
2
Press the update notification on your
smartphone to enter Feature Updates screen
in the LG ThinQ app.
3
Select the new features and press the Update
button in the Feature Updates screen.
• The progress of the update can be checked
on the appliance's display.
• Do not unplug the appliance during the
update. It may cause product errors.
4
When the update is complete, press the
(OK) button on the appliance's display to
experience the new features.
• For detailed settings of the upgraded
features, refer to the guide within the LG
ThinQ app.
Wireless LAN Module Specifications
Type Frequency Range
Wi-Fi 2412 MHz - 2462 MHz
Bluetooth 2402 MHz - 2480 MHz
FCC Notice
The following notice covers the transmitter
module contained in this product.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and the receiver.
• Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference
and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
8
Any changes or modifications in construction of
this device which are not expressly approved by
the party responsible for compliance could void
the user's authority to operate the equipment.
FCC RF Radiation Exposure
Statement
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
Output
environment. This transmitter must not be co-
Power
located or operating in conjunction with any other
(Max)
antenna or transmitter.
This equipment should be installed and operated
< 30 dBm
with a minimum distance of 20 cm (7.8 inches)
between the antenna and your body. Users must
follow the specific operating instructions for
satisfying RF exposure compliance.
Industry Canada Statement
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science
and Economic Development Canada's licence-
exempt RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference,
including interference that may cause undesired
operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC radiation
exposure limits set forth for an uncontrolled
environment.