Maintenance - Monthly; Removing Conveyor From Oven For Cleaning - Blodgett S1828E Installation Operation & Maintenance

II. MAINTENANCE - MONTHLY
NOTE: The oven interior may require cleaning more
than once a month depending on the volume of bak-
ing. To clean the interior, you have to disassemble
some parts of the oven.
When cleaning your Series S1828 Oven note the
following:
PRECAUTIONS-
1. Do not use excessive water or saturation of oven
insulation will occur.
2. Do not use a caustic oven cleaner or the aluminized
finger manifold surfaces will be severely damaged.
When cleaning your oven, first remove all heavy debris
with a vacuum cleaner. Use a damp cloth for light clean-
ing. For heavier cleaning of baked on grease and carbon
deposits use a non-caustic cleaner that will not react with
the aluminized finger manifold surfaces.
You can order non-caustic cleaner from your local
authorized Blodgett Parts Distributor in the quantities
listed below:
Part #
27170-0244
27170-0246
A. Removing Conveyor From Oven For Cleaning
1. Remove entry and exit trays.
2. Loosen (do not remove) two screws on housing guard.
3. Remove motor housing guard.
Figure 4-3.
25
SECTION 4
MAINTENANCE
Quantity
Case of Quarts (6)
Case of Gallons (4)