Table of Contents
Advertisement
CAN AM MAVERICK UTV
Execution Standard:
GB6675&GB19865 EN71&EN62115 ASTM-F963
WARNING:The toy must be assembled by adult before use. All circuit
connetions in the toy must be connected properly. Any wrong circuit
connections could cause possible dangerous malfunctions, short
circuit, sudden equipment failure and other possible failures.
Warning:
SKU NO.: FR7590
Model: DK-CA003
Applicable age: 37-95 months
Maximum weight: 30KGS/66LBS
This is a Child's Toy and NOT intended for Off-Road Use.
Advertisement
Table of Contents
Related Manuals for FREDDO DK-CA003
Summary of Contents for FREDDO DK-CA003
- Page 1 CAN AM MAVERICK UTV SKU NO.: FR7590 Model: DK-CA003 Applicable age: 37-95 months Maximum weight: 30KGS/66LBS Execution Standard: GB6675&GB19865 EN71&EN62115 ASTM-F963 WARNING:The toy must be assembled by adult before use. All circuit connetions in the toy must be connected properly. Any wrong circuit connections could cause possible dangerous malfunctions, short circuit, sudden equipment failure and other possible failures.
-
Page 2: Spare Parts List
Installation steps 1.Spare parts list 2.Rear driving 1.Car body 1 PC 3.Rear wheel 2pcs motors 2pcs 5.Front supportive 4.Fornt wheel 2pcs 6.Wheel covera 4pcs carriages 1 Pair 8.Front axle for 7.Front bumper 1pc 9.M12 gasket 9pcs direction 1pc 10.M10 locking 11.Seat cushion 1pc 12.Back of the seat screw 1pc 15.Dashboard... -
Page 3: Parts Names
Installation steps 2.Parts' names... - Page 4 Installation steps 1. Install front supportive carriages (both left and right) Install font supportive carriages onto the car body according to thepicture, and fix them with 2 pcs of M4*12mm self-tapping locking screws. 2. Install front axle for direction Install front axle for direction onto the car body, and fix it with 8 pcs of self-tapping locking screws.
-
Page 5: Install Front Wheels
Installation steps 3. Install front wheels a. Two motors version: Install M12 gasket-Wheels-M12 gasket-M10 locking screw-Wheel cover onto the front axle following the correct squence. b. Four motors verison: Install wheels-M12 gasket-M10 locking screw- Wheel onto the front axle following the correct squence. Front driving motors under four motors verison Front wheel (notes: Under four motors... -
Page 6: Install Rear Wheels
Installation steps 5. Install fix part of back supportive carriage Install fix part of back supportive carriage onto the car body, and fix it with 8 pcs of M4*12mm self-tapping locking screws. 6. Install rear wheels a. Insert the back axle into the motors and car body. (Notes: Add 1 pc of M12 gasket to the inside part of motor with 390# motors version) b. -
Page 7: Connect Power
Installation steps 7. Install decoration part of rear bumper Install decoration part of rear bumper onto the car body, and fix it with 4 pcs of M4*12mm self-tapping screws. 8. Connect Power Plug all the spare plug-in modules besides battery into holes of IC box according to the picture. -
Page 8: Install Seats
Installation steps 9. Install rear container Install rear container onto car body, and fix it with 2 pcs of M4*12mm self-tapping screws. 10. Install seats a. Assemble seat and backrest, and fixt it with 3 pcs of M4*12mm self-tapping screws. b. -
Page 9: Install Steering Wheel
Installation steps 11. Install dashboard and plastic trim a. Stuck the plastic trim on dashboard into dashboard when under the MP3 version, it not including under the MP4 version. b. Insert part1 into dashboard and fix it with 2 pcs of M4*12mm self- tapping screws. - Page 10 Installation steps 13. Install front window shield frame Insert the front window shield frame into the car body according to the picture. 14. Install rear bar Insert rear bar into the car body according to the picture.
- Page 11 Instructions 4. Function diagram of dashboard Horn and Music Button Plastic trim(MP4 Optional) MP3 Player Button Start Switch of Forward / Switch of Remote/Manual Stop / Backward (Under 2 motors version) Switch of R/C-Pedal & 2/4 motors Switch of Lights (Under 4 motors version) Description for the switch of Manual (Pedal) / Remote (R/C): Under the Manual (Pedal): the car only can drive by the child;...
- Page 12 Instructions...
-
Page 13: Troubleshooting
Instructions Troubleshooting Problem: The vehicle cannot be driven. Cause of the problem: the battery is insufficient Please charge in time after each use, and charge at least once a month. It is recommended to charge for 8-12 hours, not more than 20 hours. Problem:The car does not move. - Page 14 Instructions 01. While driving , adult supervision is required all the time 02. Always wear a helmet when driving 03. Please don't drive near road or on the footpath. 04. It is not recommended to drive the vehicle on wet surface or on slope greater than 15-degree.
- Page 15 Instructions For safety reasons, *please use this vehicle under adult guidance and supervision. *do not use this product on main roads, slopes, highways or other dangerous places. *children must wear shoes and protective gears when operating the vehicle. *children should be seated with the seat belt fasten when driving. *only load a maximum of 30Kg on the vehicle.
- Page 16 Description DK-CA003 Name 12V4.5AH / 12V7AH / 12V10AH / 12V14AH Battery 24V5AH / 24V7AH 390#12V15000RPM(Driving motors) 550#12000RPM(Driving motors) Motors 380#12V4800RPM(Steering direction changing motors) 555#24V12000RPM(Driving motors) 395#24V8000RPM(Steering direction changing motors) Maxium load 30KGS/66LBS Size 1080*735*635mm / 42.52*29*25INCH / 1.86-4.96MPH Speed 3-8km/h...
Need help?
Do you have a question about the DK-CA003 and is the answer not in the manual?
Questions and answers
Battery has been charged for 10 hours. Nothing works not even the lights. However, with power on when I turn the wheel the lights flash. Just took it out of the box.
Guten Tag, bei Ihrem Produkt können wir **** erkennen ob der Antrieb **** Fahrzeug festgeschraubt werden muss. **** das sonst beim benutzen daws Fahrzeug beschädigt wird wenn es benutzt wird. MfG