Makita GCV08PM Instruction Manual page 10

The loops on the lower belt can be used for carrying
nozzles as illustrated.
2
1
Fig.12
► 1. Loop 2. Nozzle
Hose hook
When you suspend the operation, the hook on the bent
pipe assembly can be used for hanging the wand on the
hanging part of the lower belt.
3
2 1
Fig.13
► 1. Hook 2. Lower belt 3. Hanging part
2
1
10 ENGLISH
ASSEMBLY
CAUTION:
Always be sure that the appliance
is switched off and the battery cartridge is removed
before carrying out any work on the appliance.
Assembling hose
Insert the hose cuff into the vacuum cleaner body and
turn it clockwise.
Fig.14
Fig.13
► 1. Hose cuff 2. Vacuum cleaner body
Using as a cleaner
Attaching bent pipe assembly
Optional accessory
NOTE: You don't need to perform this procedure
if your model comes with the bent pipe assembly
attached to the hose.
NOTE: There are two types of bent pipe assembly; the
one for slide-type extension wand and the one for ring-
type extension wand. If you prepare the bent pipe assem-
bly, choose the one for your desired extension wand type.
The bent pipe assembly is used for connecting the exten-
sion wand or nozzle for vacuum cleaning to this product.
If you want to use this product as the vacuum cleaner,
attach the bent pipe assembly to the hose.
For the screw-in type bent pipe assembly
To attach, unscrew the front cuff from the hose and
fasten the sleeve of bent pipe assembly onto the hose.
To remove, loosen the sleeve of bent pipe assembly from the hose.
1
Fig.15
► 1. Hose 2. Bent pipe assembly 3. Sleeve
1
2
2
3