Page 1
nuPro A-100 Active Speaker Safety Instructions Operating Manual Technical data With USB power supply for external devices, ideally suitable for wireless receivers and more!
Hence our tip: When your new speakers arrive on a cold winter’s day, just General information give them a few hours to acclimatise. Your Nubert speakers will thank you with the superior sound quality you have come to expect from us.
• No objects or foreign bodies may get into the device. • Should the loudspeaker come into contact with liquids or should objects have got inside, please unplug the mains plug immediately and contact Nubert elec- Danger! Leaking or exploding batteries can pose a health hazard and cause damage to tronic GmbH (info@nubert.de)!
– Stereo jack-phono cable (3.5 mm jack), 1.5 m – Fibre optic cable with TOSLINK connectors, 1.5 m The nuPro A-100 are high-quality, very neutral fully active Hi-Fi/ – USB cable (Type A/Type B), 1.5 m studio/multimedia loudspeakers (2-way bass reflex system). They impress with an extremely homogeneous, precise, and “direct”...
Page 5
EN 4/2020 · nuPro A-100 Connections and application examples The nuPro boxes must be completely wired before switching them on, see also our separate commissioning instructions.. The default setting of the nuPro software defines the left loudspeaker An active subwoofer can also be connected. Use the remote control of a stereo pair as master, the right one as slave.
A-100 · 4/2020 EN USB-connection to a computer Your nuPro aktive speaker can be used as a high quality, plug-and- play compatible USB interface. n Windows Under current windows versions, you need to set the nuPro speaker as the default playback device manually when connecting it to your computer for the first time.
EN 4/2020 · nuPro A-100 Remote Control The remote control of the nuPro allows direct access to all common- ly used functions: n on With this key, you toggle the speaker between active and stand-by mode. n volume and mute The volume can be adjusted with the volume keys, the mute key allows you to mute and unmute the speakers.
Page 8
A-100 · 4/2020 EN MENU Configuring your nuPro loudspeakers n SYS HP (High-pass and crossover frequency) When the nuPro are powered on, they automatically configure In this menu, you can set the high-pass (lo-cut) filter frequency. themselves as as Master- or Slave-loudspeaker, depending on the This is particularly useful if you connect a subwoofer to your nuPro cabling.
Page 9
Note: Use the left input (aux L) of each nuPro speaker. Do not con- nect the loudspeakers to each other with the SPDIF coaxial cable. Technical Data nuPro A-100 Principle Fully Active HiFi/Studio/Multimedia...
Page 10
A-100 · 4/2020 EN Menu Sitemap Note: to start navigating, press / Keys / Keys Notes VOLUME Vol 80 or V -00 dB Press-and-hold the menu button to toggle the display mode or...
Page 11
If you have any questions or problems during the commissioning of Improper handling of the speaker may result in damage. your Nubert system, please do not hesitate to contact our service • Always unplug the speaker before cleaning it! team: •...
Old appliances can also be returned to us directly in our shops or shipped back to us for disposal. Please send an Email to info@nubert.de for a free return shipping label.
Need help?
Do you have a question about the nuPro A-100 and is the answer not in the manual?
Questions and answers