Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IPC Atomax PW-C45
Summary of Contents for IPC Atomax PW-C45
-
Page 1: Accantonamento
... -
Page 2: Table Of Contents
IT - INDICE Pag. Operazioni preliminari Preparazione Consigli per l’ uso dei detergenti Descrizione simboli Manutenzione Prefazione Accantonamento Norme generali di sicurezza Rottamazione Destinazione d’ uso Inconvenienti e rimedi GB - CONTENTS Pag. Preliminary operations Preparation Advise on using detergents Description of symbols Maintenance Introduction... -
Page 3: Preparation
English Congratulations! We wish to thank you for buying this cleaner. You have shown that you do not accept compromises: you want the best. We have prepared this manual to enable you to fully appreciate the qualities and high performance that this cleaner can o er you. Please read it completely before using the machine. The CE mark on your cleaner shows that it has been constructed in compliance with the European Standards on safety. We can also o er you a wide range of cleaning machines such as: VACUUM CLEANERS, FLOOR CLEANERS, FLOOR SWEEPERS and a complete range of ACCESSORIES, CHEMICALS and DETERGENTS suitable for cleaning all kinds of surfaces. -
Page 4: Description Of Symbols
English DESCRIPTION OF SYMBOLS ON THE CLEANER DO NOT DIRECT THE JET WATER OUTPUT. AGAINST PEOPLE, ANI- MALS, POWER SOCKETS OR THE MACHINE ITSELF. SWITCHING ON THE PUMP AT T E N T I O N : R I S K O F ELECTRIC SHOCK. -
Page 5: Introduction
English GENERAL SAFETY RULES FOR CLASSIFICATION OF RISKS: THE USE OF HIGH PRESSURE Danger Identi es an imminent risk which could lead to serious or fatal CLEANERS injury. Warning Warning Identi es a risk situation which could lead to serious injury. - The electric connection must be performed by quali ed technicians who are able to Information Identi es a risk situation which could lead to minor injury or work in observance of the governing rules damage to things. - Page 6 English 60364-1). Children must be supervised to ensure they It is necessary to check this essential safety do not play with the high pressure washer. requisite. In case of doubt, ask for accurate control of the power system by quali ed - Use only original accessories that can allow personnel.
- Page 7 English - The use of the H.P. cleaner must be con- ce itself in order to disconnect the plug from sidered according to the place where the the electric supply. (For water cleaners rated washing is performed (for example: food at less than 3 kW tted with plug) plants, pharmaceutical plants, etc.) Pertinent rules and safety conditions must...
-
Page 8: Intended Use
English DATA PLATE: INTENDED USE The data plate bearing the This appliance is intended exclusively for cleaning machines, main technical characteristics vehicles, buildings and general surfaces suitable for treatment of your cleaner is located on with a high pressure jet of detergent solution between 25 and the trolley and is always visible 250 bar (360 - 3600 PSI). - Page 9 English WATER CIRCUIT CONNEC- ELECTRICAL CONNECTION TION Connection of the cleaner to the mains must be carried out by Connect the feed hose to skilled technicians able to ensure that all regulations in force the mains ( g. 4A) and to are complied with use in respect of current standards and the hosetail on the cleaner legislation.
- Page 10 English N.B. To reset the fault si- USING gnals, turn main switch “A” THE CLEANER to pos. “0” and then back to pos. “I”. CONTROL PANEL For further assistance, con- tact the technical service A - On/o switch centre. Indicator lights (if featured). B - Power indicator light.
-
Page 11: Advise On Using Detergents
English - Water cleaners with the ADVICE ON USING DETERGENTS “Total Stop” device should be considered as o when the Warning omnipolar switch is in the “O” This cleaner has been designed for use with the detergents position or the plug is unplug- supplied or recommended by the manufacturer. -
Page 12: Maintenance
English 6) Start the cleaner and let it run until antifreeze comes out MAINTENANCE through the lance. 7) Suck up antifreeze with the detergent intake system too. ONLY THE OPERATIONS AUTHORIZED IN THIS IN- 8) Switch o the cleaner and disconnect the electric power by STRUCTIONS MANUAL MAY BE CARRIED OUT BY THE switching o the omnipolar switch,via the omnipolar switch or USER. -
Page 13: Periods Of Inactivity
English CHANGING THE HIGH PRESSURE NOZZLE Information The high pressure nozzle tted on the lance must be changed from time to time, as this component is subject to normal wear during use. Wear may generally be detected by a drop in the working pressure of the cleaner. To replace it, consult your supplier and/or dealer for instructions. -
Page 14: Trouble-Shooting
English TROUBLE-SHOOTING Before carrying out any operations, disconnect the cleaner from the power (via the omnipolar switch or by unplugging the plug from the socket) and water supply. FAULTS CAUSES REMEDIES When the switch is turned the cleaner Faulty electric connection. Check the mains voltage. -
Page 15: Préparation
Note - Notes... -
Page 16: Description Des Symboles
Note - Notes... -
Page 17: Préface
DICHIARAZIONE DI CONFORMITA’ “CE” DECLARACIÓN “CE” DE CONFORMIDAD Bajo nuestra exlusiva responsabilidad, declaramos que el Dichiariamo sotto la nostra esclusiva responsabilità che il pro- dotto al quale questa dichiarazione si riferisce è conforme alle producto, al que esta declaraciòn se re ere, es conforme con seguenti Direttive Comunitarie: las siguientes directivas comunitarias: “CE”... - Page 18 Caratteristiche tecniche - Technical data • Modello Mod. Mod. Mod. Mod. Mod. Mod. 1112P4 - D 1310P4 - D 1708P4 - D 1813P - D 1814P4 - D 1915P4 - D Model • Alimentazione Power supply 230 / 240 230 / 240 230 / 240 230 - 4/415 230 - 4/415...
- Page 19 Caratteristiche tecniche - Technical data • Modello Mod. Mod. Mod. Mod. 2117P - D 1721P - D 2021P - D 2515P - D Model • Alimentazione 230 - 4/415 230 - 4/415 230 - 4/415 230 - 4/415 Power supply •...