Figure 478. Cable routing to 8i RAID/HBA adapter
From
Backplane 1: SAS 0, SAS 1
1
12 x 3.5-inch SAS/SATA backplane
This section provides cable routing information for the server model with the 12 x 3.5-inch SAS/SATA front
backplane.
To connect power cables for the front backplane(s), refer to
drive bays" on page
437.
To connect signal cables for the front backplane(s), refer to the following cable routing scenarios depending
on your server configuration.
•
"Front backplane: 12 x 3.5" SAS/SATA" on page 441
•
"Front + rear backplanes: 12 x 3.5" SAS/SATA + 4 x 2.5"/2 x 3.5"/4 x 3.5" SAS/SATA/4 x 2.5" AnyBay" on
page 442
•
"Front + middle backplanes: 12 x 3.5" SAS/SATA + 4 x 3.5"/4 x 2.5" SAS/SATA/8 x 2.5" NVMe" on page
448
•
"Front + middle + rear backplanes: 12 x 3.5" SAS/SATA + 4 x 3.5" SAS/SATA + 4 x 3.5"SAS/SATA" on
page 451
ThinkSystem SR665 V3 User Guide
440
To
8i adapter
1
• Gen 4: C0
• Gen 3: C0C1
"Backplanes: server models with 3.5-inch front