Panasonic Palmcorder PalmSight PV-L779 Operating Instructions Manual page 58

Digital Still Camera
Before you begin...
P * Connect Camcorder to power source.
Captured still images (pages 52, 53) a * insert the CompactFlash Card (page 51).
be recorded along with the current picture. , Set POWER to CAMERA.
( P - P - Picture in Picture )
1 Set DIGITAL SELECT to DIGITAL ©
WIPE.
* A still image captured on the CF
card and the Multi image playback
page number is displayed on the
right side of the screen.
* If there are no recordings on the
card, "NO PICTURE" appears
on-screen.
Moving a 2 Press + (FF) or - (REW) to select
Picture still image to be used.
3 Start recording (page 22).
* When recording starts, Multi image
playback number disappears. Then
the capture still images can be
recorded along with the current
picture.
* To exit from the Picture in Picture .
Wipe title mode, press MODE
(page 59).
Note:
* If CompactFlash Card is not inserted,
"NO CF CARD" appears on-screen. Set
Power to OFF, then insert the
CompactFlash Card.
* Pictures captured with other brand
products cannot be used with this
Camcorder.
* If "INCOMPATIBLE IMAGE" appears
on-screen, the size of the captured
image cannot be played back on this
Camcorder.
* If "CF CARD ERROR" appears
on-screen, see page 80.
* |f Picture in Picture Wipe Title selected,
the following functions are not available:
Security mode, Auto Fade, Digital Fade,
Digital Filter, Digital Zoom, Digital E.!.S.,
Still/Strobe/Wide.
58 For assistance, call 1-800-211-PANA(7262)