Table of Contents
Advertisement
11. TECHNICAL DATA
Voltage: 220-240 V~ 50-60 Hz max. 10A
Absorbed power:
Pressure:
Water tank capacity: 2.5 litres
Size: LxHxD:
Weight:
12. DISPLAYED MESSAGES
Displayed message
EMPTY GROUND COFFEE
WASTE CONTAINER
INSERT THE GROUND COFFEE
WASTE CONTAINER
ADD PRE-GROUND COFFEE
GROUND TOO FINE. ADJUST
GRIND LEVEL CLOCKWISE
TOO MUCH POWDER. SELECT
A MILDER TASTE OR REDUCE
THE AMOUNT OF PRE-GROUND
COFFEE
INSERT BREWING UNIT
PLEASE DESCALE YOUR MA-
CHINE
1350W
15 bar
594x454x412mm
20 kg
Possible cause
The ground container is full.
The ground coffee waste container
is not positioned correctly.
The pre-ground coffee function has
been selected without placing any
pre-ground coffee in the funnel.
The pre-ground coffee funnel is
clogged.
The grinding is too fine and the
coffee is delivered too slowly or
not at all.
If the softener filter is present, an
air bubble may have been released
inside the circuit, obstructing
delivery.
Too much coffee has been used.
The brewing unit is not placed in
the correct position
The machine must be descaled.
This appliance conforms to EC Regula-
tion 1935/2004 concerning materials and ar-
ticles intended to come into contact with food.
The appliance must not be disposed
of with household waste, but taken to
an authorised waste separation and
recycling centre.
Empty the ground coffee waste
container, clean and replace.
IMPORTANT: the container might
not be full. This is a normal clean-
ing message to prevent from mold
creation after some time.
Insert correctly after cleaning the
ground coffee waste container.
Place pre-ground coffee in the fun-
nel and repeat delivery
Empty the funnel with the help of
a brush.
Repeat coffee delivery and turn the
grinding adjustment dial one click
clockwise towards "7" while the
coffee mill is in operation. If after
making at least 2 coffees delivery is
still too slow, repeat the correction
procedure, turning the grinding
adjustment dial another click until
delivery is correct. If the problem
persists, make sure the water tank
is fully inserted.
Insert the hot water/steam spout in
the machine and deliver a little wa-
ter until the flow becomes regular.
Select a milder taste or reduce
the quantity of pre-ground coffee
(maximum 1 measure).
Insert the brewing unit correctly in
position after cleaning.
Follow the instructions on the
display and the procedure
Action
ENGLISH
13
Advertisement
Table of Contents
