Acer G205H Service Manual page 18

Acer
Drop Height(cm)
Drop sequence and orientation
Drop
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Mechanical and electrical damage should not exist after vibration test, and shall be submitted for approval
customer before mass production.
9.
Marking and Identification
9.1 S/N Label
The approval marking is required by the countries of sales destination.
9.2 Carton label
The approval marking is required by the countries of sales destination.
Drop onto
Corner(2-3-5)of package
Edge(3-5) of package
Edge(2-3) of package
Edge(2-5) of package
Face(bottom-3)of package
Face(left-4) of package
Face(front-5) of package
Face(right-2) of package
Face(rear-6) of package
Face(Top-1) of package
76
(
Type Drop
Corner
Edge
Edge
Edge
Flat
3 EMBED AutoCAD.Drawing.16
Flat
Flat
Flat
Flat
Flat
Acer –LCD-G205H
Figure
4 5
!!